NT2S
Applications
The NT2S condenser microphone is a large diaphragm microphone with three
polar patterns.With improved capsule structure,its sound has a very transparent
characteristic.Plus a higher maximum sound presser level,this microphone is
used for many diverse applications in professional recording studios and
semiprofessional productions.
Features
Pressure-gradient transducer with large double membrane capsule
Three directional characterstics:omin,cardioid,figure-8
Class A amplifier transformerless circuitry
High output level
Switchable low frequency roll-off filter and 10 dB pre-attenuation
Specifications
| Acoustical operating principle | pressure gradient transducer |
| Directional pattern | Omin,Cardioid,figure-8 |
| Frequency rang | 20 ~ 20 kHz |
| Sensitivity at 1KHz into 1Kohm | 25mV/Pa ( -32dBV , re. 0dB=1V/Pa) |
| Rated Impedance | 200 Ohm |
| Recommended load impedance | 1000 Ohm |
| MAX. SPL for 1% THD @1000Hz | 135 dB |
| Equivalent SPL DIN/IEC 651 | 18 dB-A |
| S/N ratio DIN/IEC 651 | 76 dB-A |
| Supply voltage | 48 V phantom power |
| Matching connector | 3-pin XLR (gold plated) |
| Net weight | 540 g |
| Diameter | 50 mm |
| Length | 205 mm |
User Manual
NT2S.pdf